If you have recently bought the TP-Link router, you might want to know how to set up a TP-Link router? The TP-Link Router connects your home’s devices to the internet wirelessly. TP-Link Wi-Fi routers feature dual-band capabilities and Ethernet connections. However, TP-Link routers will require you to set them up the first time you use them.
First, install the TP-Link Tether app. Next, connect your router. Then, make your new router accessible to the internet. Once that is done, start the Tether app and Log in. Next, you will require adjusting the router settings. Establish an internet connection and save all your settings. In this way, you can set up your TP-Link router.
How to Setup A TP-Link Router
By using the TP-Link router app, you can easily set it up. It is still possible for you to get overwhelmed by the whole installation process. Here is how to easily set up a TP-Link router.
- First, click on TP-Link Tether and install it. Wait until you connect your new router before opening the app.
- Find the modem for your internet provider. In most homes, this is near where your telephone line or cable enters the house. Plug an Ethernet cable into the yellow connector on your modem. Connect the yellow connector to the router’s socket.
- Navigate to the settings on your phone to find the new router. At the bottom, you should see the name and router password. Consult the label below the router to establish a connection. The label might indicate a broken connection. You have not yet installed the router, so that’s true.
- Start the TP-Link app. The app starts looking for TP-Link routers immediately. The installation will begin when you enter your username and password. You can find them under the ‘local devices’ section. The router’s sticker contains this information.
- You’re now ready to configure your router. Start by choosing the type of connection. Use Dynamic IP if your router sits behind your provider’s modem. The modem will assign your router an IP automatically. It is up to your Internet provider to fix this if it doesn’t work. Choosing a password and naming your network are optional steps in the next step.
- While installing your network, you will also hear about the name you have chosen for your network; ensure to remember it. Save all settings by clicking ‘Save’ in the upper right corner. When the setup is complete, click Finish.
Conclusion
Getting your TP-Link router up and running can be difficult. In particular, if it’s your first time. Setting up TP-Link routers is easy with the app for the device.
The whole installation process will become easy once you know the process. This article will show you how to set up your TP-Link router.